Tag Archive

Tag Archives for " how to "

How to Cut Galvanized Steel Pipe

When it comes to setting up water lines and indoor plumbing, nothing beats the malleable strength of galvanized steel pipe. This material is highly recommended for homeowners who live in the colder parts of the world and those who experience more rigid weather conditions, especially in the Wintertime. These homes are much more prone to pipe damage and the need for repair.

Knowing how to cut through galvanized steel pipe is an important life hack every homeowner should be able to do. While galvanized steel pipe is one of the best solutions for water lines, it’s still not immune to the damages brought about by extreme weather conditions. When these pipes get damage, you’re going to have to call a plumber to have them replaced, and by the time he arrives, the pipes will have leaked precious water. Wouldn’t it save you the Imagine the amount of time and water you can save if you knew how to cut galvanized steel pipe yourself! Read on, and we’ll show you everything there is to know about this life hack.

Continue reading

How To Make A Biscuit Joint

How to make a biscuit joint is one of the most fundamental things you must learn in the art of woodworking. Biscuit joints are very easy to do if you have the right kind of tools laying around your garage or workshop. It involves attaching boards together by their edges in order to come up with a wider plank or slab of wood without the need for screws and splicing techniques.

This basic type of joint is ideal for making furniture, tabletops, and cabinets. Another reason why biscuit joints are one of the most popular projects in woodworking is that it can be crafted out of all kinds of wood, given that these are in sheet form. For solid wood fabrication, biscuit joints can be a good replacement for mortise and tenon joints.

Continue reading

How To Remove BaseBoard – Step-By-Step Instruction

Trying to remove a poorly installed baseboard? Perhaps, the molding is already damaging your wall or your floor. Or maybe, you just want to replace it with a newer and better design. If you want to do the job without asking any professional for help, then you only have to arm yourself with the right tools and the proper knowledge.

The baseboard is that plastic or wood that covers the joint between the floor and walls. It might also include any present shoe molding. Professionals know how to remove wooden baseboards without damaging the material, thus, making it possible for you to reuse the plastic or wood. You can do so, too. What’s more is that you can avoid damaging the wall or the floor.

Continue reading

How To Cut Cement Board – Helpful Tips For You

Cement is usually used in several home projects as it’s stronger than plywood, more durable, and less susceptible to rotting. Its strength makes it one of the most reliable house materials. However, it’s also its strength that makes it difficult to work with, especially when it comes to renovation.

If you need to have a new look for your bathroom, upgrade your kitchen, or other home improvement projects, then you might need to cut the cement board before you can install new tiles. However, doing so is a messy job if not done properly. In fact, it’s trickier than cutting a drywall or lumber.

Continue reading

How To Remove Spray Paint From Plastic – All You Need To Know

Spray painting plastic is a burdensome task, but not as burdensome as trying to remove the same paint from the material. Plastic, unlike ceramic, wood, or metal, needs to be given more attention, so it will not break. It is highly vulnerable, and a wrong solvent can damage or even melt it. Moreover, many solvents in the market are catered to removing paint from metal or wood, which are inappropriate choices. If you are to remove spray paint from plastic, you need to make sure that you are using the safest and most effective method. Here’s a guide to help you do it.

Continue reading

How To Rethread A Bolt – It’s Not As Hard As You Think

When it comes to screws and bolts, one of the inevitable things that would happen would be for the bolts to lose its threads, brought about by either constant wear and tear, loosening and tightening, as well as rusting due to exposure to open air, as well as water with plenty of dissolved oxygen. The former two would cause the threads of the bolt or screw to grow thinner, and therefore not fit properly or tightly in the hole. The latter, or the exposure to rust, on the other hand, would call for rethreading as the rust would cause the threads to be shallower, as rust may possibly get thicker as time goes by.

Continue reading

How to Drill Into Brick – A Quick Guide for Homeowners

How to drill into brick wall- Have you ever thought about it? If you live in a brick house, you probably already know how tricky it is to hang paintings and other decors on your wall. It’s perfectly natural to fear that once you drilled into the brick, your house will fall apart. Hanging a clock or picture on a brick fireplace poses the same problem. Installing screws into the mortar in between the bricks may lead it to crumble.

However, you need not dwell on the dilemma of how to drill into brick for long as there’s a perfectly safe and effective way to do it. What you need are proper equipment and the right guide to assist you in doing it. To help you out, here’s a quick and detailed guide that you can easily follow so you can decorate your place in no time.

Continue reading

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close